1750 Pelican Rifle Case with Foam

PL-1750
$238.89
1750 Pelican Rifle Case with Foam
Processing...

1750 Pelican Rifle Case with Foam

Review this Product
Code: PL-1750
$238.89

Availability: Out of Stock

Product Details


Pelican's 1750 Rifle case has interior dimensions of 50.50" x 13.50" x 5.25". The case comes with 2 layers of high density foam in the main compartment and convoluted foam in the lid. This is not the Pick N Pluck foam found in most of our other cases. Lay out your rifle and accessories on the foam in your desired configuration and trace out the patterns with a marker. It is recommended you use an electric knife or similar tool to make the cutting job nicer and easier. Because you receive 2 layers of bottom foam you can have 2 different configurations for your case. If you save your cutouts you can insert them back into the foam and use that piece as the bottom layer and make a new custom configuration with the uncut piece.

The 1750 can be used as a double rifle case. The barrel of one rifle would be lying next to the stock of the other to make this work. The rifles would be facing in opposite directions.

The 1750 has strong and comfortable fold down handles and a total of 6 easy open double throw latches to lock the lid to the base. The 2 polyurethane wheels with stainless steel bearings take the load off your shoulders.

Pelican has a reputation of providing protection for valuable assets. The Open Cell Core and Solid Wall construction, O-ring seal and Gore-Tex Pressure valve make the 1750 case crushproof, waterproof and dustproof.

This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association) standards.

Watertight, crushproof, and dust proof

This Pelican Case is constructed of Polymer with an open cell core and solid wall making them stronger than solid core designs. During the construction process foaming agents are mixed in with polymer pellets, causing them to expand inside the mold. The outside skin is formed when the expanded pellets come in contact with the inside of the mold walls. This process is more time consuming that conventional injection molding but results in a structure that is more rigid and lighter than solid core wall designs.
One major advantage of open cell designs and closed cell walls is that in the event of an impact breaking through a panel the closed cell walls will act as a barrier preventing the fracture from penetrating the case.

A Polymer O-ring combined with tongue and groove design provides a waterproof and airtight seal keeping equipment dry and dust free.

Deflector Ribs

Deflector ribs are designed to protect the hinges and latches on pelican cases. An impact directed at the ribs will be deflected away from the case protecting the vital hinge and latch points.

Easy open Double Throw latches

Pelican latches offer amazing strength but open with a slight pull. It's called a double throw latch because it uses a secondary movement to create leverage making the opening of a pelican case almost effortless. These are available on the entire Pelican lineup.

Polyurethane wheels with stainless steel bearings

The wheel system on select pelican cases are designed for durability and smooth operation. A nylon hub surrounding the bearing protects the polyurethane wheel from heat which reduces wear and tear.

Fold down over molded handle

The spring loaded handle is molded for comfort and conveniently folds down after use.

Stainless Steel

Stainless steel pins are used in the hinges and handles for strength and durability

Stainless steel padlock protectors

Stainless steel fitted over the padlock holes for added strength and security.

Automatic Pressure Equalization Valve

Automatic Pressure Equalization Valve uses Gore-Tex technology to prevent pressure damage to the case while keeping contents dry and making the case easier to open.

Nameplate Engraving

If you want a personal nameplate for you case, just fill out the included paperwork and send it into Pelican.

Lifetime Guarantee of Excellence

Pelican Products are guaranteed to provide a lifetime against breakage or defects in workmanship. Injection molded cases are guaranteed to be watertight to a depth of 3.3 feet (1 meter) for 30 minutes. This warranty is limited to the case and not the contents and are also void if the case has been altered, abused, misused or in the case of negligence or accident.

Specification

Exterior Dimensions
(L x W x D)
Interior Dimensions
(L x W x D)
53.00" x 16.00" x 6.12"
(134.6 x 40.6 x 15.5 cm)
50.50" x 13.50" x 5.25"
(128.2 x 34.3 x 13.3 cm)
 
Lid Depth Bottom Depth Total Depth
1.75"
(4.4 cm)
3.50"
(8.9 cm)
5.25"
(13.3 cm)
Weight with foam Weight without foam Buoyancy Max.
25.57 lbs.
(11.6 kg)
23.59 lbs.
(10.7 kg)
187.39 lbs.
(85 kg)
Range Temperature No. of Wheels
-40 / 210 F
(-40 / 99 C)
2