Monadnock Autolock Baton Swivel Holder
$2.00 – $29.56
These Monadnock Front Draw® Holders with Clip-On backs are designed for the AutoLock® batons. The holders are made from durable polycarbonate and feature a molded tension spring for baton security.
- Description
- Additional information
- Reviews (0)
Description
These Monadnock Front Draw® Holders with Clip-On backs are designed for the AutoLock® batons. The holders are made from durable polycarbonate and feature a molded tension spring for baton security. The design is comfortable to wear and offers a quick draw from any position.
• The holder rotates in 360 degrees and locks in one of 8 locking positions
• The 45 degree option is appropriate for an officer using the 26″ (66.04 cm) baton with the Hindi Baton Cap installed on it
• The 45 degree holder is also an option for anyone concerned about their baton rotating too far in the holder
• The baton may be re-holstered in the locked position either open or closed, as necessary, saving time to control the suspect
Remember: You need the appropriate holder for the style of AutoLock used. This is to facilitate the ability of the officer to put the baton in the holder while in the locked open position.
• 21″ (53.35 cm) baton holder has the half moon bottom for Safety Tip® style baton
• 18″ (45.72 cm), 22″ (60.96 cm) and 26″ (66.04 cm) baton holders have the horizontal cut bottom to be able to receive the Power Safety Tip style baton.
• For Clip-ons only: The pad is used to put on the inside back of the clip on back to maintain the holder from moving on the duty belt
• If using the 2 ¼” (5.715 cm) belt, the pad may or may not be necessary depending on the thickness of the belt. You might place undue stress on the holder. Note: You may use ½ the pad for off duty belt.
• Accommodates either the Foam grip or Super Grip®
Note: when using a baton with the Super Grip® slightly twist the Super Grip® when drawing from the holder and slightly twist it when returning it to the holder for easier functionality. The Super Grip® is very tactically retentive so it grabs the holder for excellent baton retention
You can take the holder off the belt without stripping the whole belt
Fits: 2.25 (5.715 cm) belt widths
Make sure the proper holder is chosen to the appropriate AutoLock® baton. This is important as far as high or low carry of the baton is concerned. Good balance is important for the ease and comfort of wear to the officer.
Part #
|
Description
|
Type
|
Finish
|
3042
|
AutoLock®-18″ 360° Swivel Holder
|
Clip-On
|
Plain
|
3042L
|
AutoLock®-18″ 45° Only / Swivel Holder
|
Clip-On
|
Plain
|
3030
|
AutoLock®-21″ 360° Swivel Holder
|
Clip-On
|
Plain
|
3030L
|
AutoLock®-21″ 45° Only / Swivel Holder
|
Clip-On
|
Plain
|
3034
|
AutoLock®-22″ and 26″ 360° Swivel Holder
|
Clip-On
|
Plain
|
3034L
|
AutoLock®-22″ and 26″ 45° Only / Swivel Holder
|
Clip-On
|
Plain
|
3056
|
AutoLock®-26″ (Low Carry) 360° Swivel Holder
|
Clip-On
|
Plain
|
3056L
|
AutoLock®-26″ (Low Carry) 45° Only / Swivel Holder
|
Clip-On
|
Plain
|
3642
|
AutoLock®-18″ 360° Swivel Holder
|
Clip-On
|
Basketweave
|
3642L
|
AutoLock®-18″ 45° Only / Swivel Holder
|
Clip-On
|
Basketweave
|
3630
|
AutoLock®-21″ 360° Swivel Holder
|
Clip-On
|
Basketweave
|
3630L
|
AutoLock®-21″ 45° Only / Swivel Holder
|
Clip-On
|
Basketweave
|
3634
|
AutoLock®-22″ and 26″ 360° Swivel Holder
|
Clip-On
|
Basketweave
|
3634L
|
AutoLock®-22″ and 26″ 45° Only / Swivel Holder
|
Clip-On
|
Basketweave
|
3656
|
AutoLock®-26″ (Low Carry) 360° Swivel Holder
|
Clip-On
|
Basketweave
|
3656L
|
AutoLock®-26″ (Low Carry) 45° Only / Swivel Holder
|
Clip-On
|
Basketweave
|
Additional information
Weight | 2.20 lbs |
---|---|
Choose Size | 18" Autolock 360 Swivel, 18" Autolock 45 Swivel, 21" Autolock 360 Swivel, 21" Autolock 45 Swivel, 22" & 26" Autolock 360 Swivel (+$3) +$3.00, 22" & 26" Autolock 45 Swivel (+$3), 26" Autolock Low Carry 360 Swivel (+$3), 26" Autolock Low Carry 45 Swivel (+$3) +$3.00 |
Choose Color | Basketweave, Black |
Reviews
There are no reviews yet.