Sniper BDU Ghillie Suit Jacket and Pant

The Ultra-Light Heavy Duty Sniper Style BDU (Battle Dress Uniform) Jacket and Pants Ghillie Suit is made in the USA. It is custom built to your specifications and takes 3-5 days to build and ship. This is the Sniper version which means the front of the BDU Jacket and Pants is left bare of Jute material. Because snipers spend plenty of time stalking and crawling around, the front of the Suit is reinforced with a layer of Cordura material. This makes sniper crawls over rough terrain much easier. This BDU Suit has a 3 layer construction design:

The Base Layer is a Military BDU which comes in 6 different pattern choices. These are made by Atlanco. On the front of the BDU we sew a 1000 Denier Cordura Plus fabric. The Plus means the Cordura has a urethane coating which makes it water proof, so you won’t get wet while lying down.

CORDURA Reinforced- the front of the Sniper Ghillie Suit is reinforced with a layer of matching Cordura material.

The 2nd layer is our 1″ x 1″nylon netting. This is sewn directly to the back of the Military BDU Jacket and pants with Industrial strength sewing machines.

The 3rd layer is where our synthetic Ghillie jute comes in. It is hand tied directly to the netting and covers the back of Jacket and Pants and also the attached hood.

Our Synthetic Jute thread is:  Fire-retardant, Water-repellant,  Rot Proof,  Mildew resistant,  Non-Allergenic,  Contains No UV-Brighteners

BDU Sniper Jacket Specifications

The Jacket is a Military BDU 4 Pocket Coat made by Atlanco. We then sew 1″ by 1″ netting on the back and then hand tie synthetic Jute onto the netting. The Synthetic Jute thread covers the entire back of the jacket, the back of the sleeves and the hood.

  •  On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which makes the suit water-proof, so you won’t get soaked when crawling around in wet conditions.
  •  We have attached 1″ wide Nylon straps to the inside of the sleeves as thumb loops, so the sleeves won’t ride up your arms when crawling. • The front jacket buttons have been removed and Velcro has been sewn on so you won’t feel the bumps when crawling.
  •  By using netting on the outside of the BDU Jacket, you can add natural vegetation while out in the field. This allows you to change your pattern by adding leaves and other foliage.
  •  Actual weight for the Medium Regular jacket is 3 lbs.
  •  Pockets come closed but you can choose to make the pockets accessible

The Hood is constructed by hand tying synthetic Jute thread to 1″x1″ netting and then sewing this to the Jacket. This design helps you to stay cooler by allowing the wind to pass through. It also allows for better hearing.

BDU Sniper Pants Specifications

The Military BDU Pants are made by Atlanco. We sew 1″ by 1″ netting on the back and then hand tie synthetic Jute onto the netting. The Synthetic Jute thread covers the entire back of the pants.

On the front of the pants, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which makes the suit water-proof, so you won’t get soaked when crawling around in wet conditions. The 1000 Denier is also very abrasive resistant, so you can crawl over rocks and sticks with ease.

  •  Top front and rear pockets are accessible.

Care Instructions: If the suit needs cleaning just hand wash and hang it out to dry. On the Jute suits you will need to reapply fire retardant after washing.

NOTE: This is a custom built suit. Once built there are no cancellations or returns. We do accept size exchanges and this is subject to a 20% restocking fee.

Buy The Ultra-Light Sniper BDU Ghillie Suit Here

Sniper Jute BDU Ghillie Suit Jacket and Pants

  •  This suit is pre-treated with a Class “A” fire-retardant
  •  Built on a BDU 4 Pocket Jacket
  •  Urethane Coating for water repellency

The BDU Sniper Jacket and Pants Ghillie Suit is made in the USA and is built using a set of tough BDU (Battle Dress Uniform) Jacket and Pants. This is the Sniper version of the BDU Ghillie Suit which means that the front of the suit is left bare of Jute Thread. The front of the Jacket and Pants is instead reinforced with a layer or Cordura to make it last through long sniper crawls. The Sniper BDU Ghillie is tough enough to last through a military training course.

This BDU Jacket and Pants uses the original Jute thread which makes it almost twice as heavy as our Ultra-Light version.

This Jute BDU Suit has a 3 layer construction design:

The Base Layer is a Military BDU which comes in 6 different pattern choices. These are made by Atlanco. On the front of the BDU we sew a 1000 Denier Cordura Plus fabric. The Plus means the Cordura has a urethane coating which makes it water proof, so you won’t get wet while lying down.

 CORDURA Reinforced– the front of the Sniper Ghillie Suit is reinforced with a layer of matching Cordura material.

The 2nd layer is our 1″ x 1″nylon netting. This is sewn directly to the back of the Military BDU Jacket and pants with Industrial strength sewing machines.

The 3rd layer is where the Traditional Jute comes in. It is hand tied directly to the netting and covers the back of Jacket and Pants and also the attached hood.

BDU Sniper Jacket

Our High Quality Jute Thread is tied directly on to the 1″ by 1″ netting which is fastened to a Military BDU 4 pocket coat. These are made by “ATLANCO”. The tied on Jute thread covers the entire Back of the jacket, tops of the arms, and shoulders.

Thumb Loops have been attached to the sleeves so they don’t pull up on your arms when crawling.

The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura “Plus” means it has a Urethane Coating for water repellency. All the buttons on the chest have been removed, and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons. The weight of the BDU Sniper Jacket is about 6 lbs).

The Hood is built by hand tying the Jute thread to a 1″x1″ netting and then sewing this to the Jacket. This design keeps you cooler by allowing the wind to pass through and also allows for better hearing.

BDU Sniper Pants

The BDU Sniper Pants are built the same as the BDU jacket. Jute thread is tied directly on to 1″ by 1″ netting which is fastened to Military BDU trousers. These are made by “ATLANCO”. The Jute thread is tied on to the back of the pants and a 1000 Denier Cordura Plus Material is sewn on to the front for those long sniper crawls. The Cordura “Plus” means it has a Urethane Coating for water repellency The weight of the BDU Sniper Pants is about 3.5 lbs.

On the BDU Jacket the length on the small is 29″ from the bottom of the collar down, 32″ on the Regular and 35″ on the Long

Care Instructions: If the suit needs cleaning just hand wash and hang it out to dry. On the Jute suits you will need to reapply fire retardant after washing.

NOTE: This is a custom built item. Once built there are no cancellations or returns. We do accept size exchanges and this is subject to a 20% restocking fee.

Buy the Sniper Jute BDU Ghillie Suit Here

Leave a Comment

Shopping Cart
Scroll to Top